Nonport Side Led Activity For The 8/80 San Switch; Nonport Side Led Patterns During Normal Operation - HP StorageWorks 8/24 - SAN Switch Hardware Reference Manual

Nonport side LED activity for the 8/80 SAN Switch

Table 1 1 describes LEDs and recommended actions.
Table 1 1 Nonport side LED patterns during normal operation
LED name
Power supply
status
Fan status
LED color
Status of hardware
Power supply is not receiving
No light
power or is off.
Power supply is operating
Steady green
normally.
Power supply fault for one of the
following reasons:
•
•
Steady amber
•
nl
(for more than five
seconds)
NOTE:
When the switch is first powered
on the power supply status LED
will show amber until POST has
completed.
Fan assembly is not receiving
No light
power.
Fan assembly is operating
Steady green
normally.
Fan fault for one of the following
reasons:
•
•
Steady amber (for
more than five
seconds)
NOTE:
When the switch is first powered
on, the fan status LED will
show amber until POST has
completed.
Power supply is switched off.
Power cable is disconnected.
Power supply has failed.
One or more of the fan(s) in the
fan assembly has failed.
The fan FRU was disabled by
the user.
8Gb SAN Switch hardware reference manual
Recommended action
Verify that the power supply is on
and seated and the power cord
is connected to a functioning
power source.
No action required.
Try the following:
•
Check the power cable
connection.
•
Verify the power supply is on.
•
Replace the power supply FRU.
Try the following:
• Verify the fan FRU is seated.
• Verify the switch is on.
No action required.
Try the following:
•
Verify the fan FRU is enabled
(use the fanEnable command).
•
Replace the fan FRU.
53