Diagnostic Tests - HP StorageWorks 2/8-EL - SAN Switch Installation Manual

Diagnostic Tests

Diagnostic tests help troubleshoot the hardware and the firmware. The diagnostic
tests provided on the switch include tests of internal connections and circuitry,
fixed media, and any SFP modules and fiber optic cables in use. The tests are
implemented by command, either through a telnet session or through a terminal
set up for a serial connection to the switch. Some tests require the ports to be
connected by external cables, to allow diagnostics to verify the
serializer/deserializer interface, as well as the attached SFP and cable.
All diagnostic tests are run at link speeds of both 1 Gbps and 2 Gbps. For
information about the specific diagnostic tests and how to run them, refer to the
HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures User Guide.
Note:
specific speed during diagnostic testing.
SAN Switch 2/8 Version 3.1.x Installation Guide
The transmit and receive speed of the links may be temporarily locked to a
Managing the SAN Switch 2/8
81