Assembling The Outer Rails (Hp Rack); Assembling The Inner Rails - HP StorageWorks 2/16 - SAN Switch Installation Manual

Installing the SAN Switch 2/16
1
2
SHR-2560A
Outer rail alignment pins M5 torx screws
1 2
Figure 11: Assembling the outer rails (HP rack)
7. Assemble the two inner rails (one on each side) to the switch using (6) #8-32
x 5/16 Phillips pan-head screws, and #8 flat washer as shown in Figure 12.
Figure 12: Assembling the inner rails
hp StorageWorks SAN Switch 2/16 Installation Guide 43