System Group; Sysdescr; Sysobjectid; Sysuptime - HP StorageWorks 2/64 - Core Switch Reference Manual

System group

All systems must implement the System Group. If an agent is not configured to have a value for any of the
System Group variables, a string of length 0 is returned.

sysDescr

OID
Description
Note

sysObjectID

OID
Description
Note

sysUpTime

OID
Description

sysContact

OID
Description
Note

sysName

OID
Description
Note

sysLocation

OID
Description
Note
1.3.6.1.2.1.1.1
A textual description of the entity.
This value should include the full name and version identification of the hardware type,
software operating system, and networking software. The value must contain only
printable ASCII characters.
Default Value = Fibre Channel Switch. Set this value using the agtCfgSet command.
1.3.6.1.2.1.1.2
The vendor's authoritative identification of the network management subsystem contained
in the entity.
This value is allocated within the Storage Management Initiative (SMI) enterprises subtree
(1.3.6.1.4.1) and provides an easy and unambiguous means for determining what kind
of device is being managed.
For example, if a vendor, NetYarn, Inc., was assigned the subtree 1.3.6.1.4.1.4242, it
could assign the identifier 1.3.6.1.4.1.4242.1.1 to its Knit Router.
Default value =
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcSwitch.sw
1.3.6.1.2.1.1.3
The time (in hundredths of a second) since the network management portion of the system
was last reinitialized.
1.3.6.1.2.1.1.4
The textual identification of the contact person for this managed node, together with
information on how to contact this person.
Default value = Field Support. Set this value using the agtCfgSet command.
1.3.6.1.2.1.1.5
An administratively assigned name for this managed node. By convention, this is the
node's fully qualified domain name.
Default value = preassigned name of the switch.
1.3.6.1.2.1.1.6
The physical location of this node (for example, telephone closet, 3rd floor).
Default value = End User Premise. Set this value using the agtCfgSet command.
Fabric OS 5.x MIB reference guide 41