IP routing table
The IP routing table contains an entry for each route currently known to this entity.
ipRouteTable
OID
Description
ipRouteEntry
OID
Description
Index
ipRouteDest
OID
Description
Note
ipRouteIfIndex
OID
Description
Note
ipRouteMetric1
OID
Description
Note
ipRouteMetric2
OID
Description
Note
ipRouteMetric3
OID
Description
1.3.6.1.2.1.4.21
This entity's IP routing table.
1.3.6.1.2.1.4.21.1
A route to a particular destination.
ipRouteDest
1.3.6.1.2.1.4.21.1.1
The destination IP address of this route.
An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single
destination can appear in the table, but access to such multiple entries is dependent on
the table-access mechanisms defined by the network management protocol in use.
1.3.6.1.2.1.4.21.1.2
The index value that uniquely identifies the local interface through which the next hop of
this route should be reached.
The interface identified by a particular value of this index is the same interface identified
by the same value of ifIndex.
1.3.6.1.2.1.4.21.1.3
The primary routing metric for this route.
The semantics of this metric are determined by the routing protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set to –1.
1.3.6.1.2.1.4.21.1.4
An alternate routing metric for this route.
The semantics of this metric are determined by the routing protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set to –1.
1.3.6.1.2.1.4.21.1.5
An alternate routing metric for this route.
Fabric OS 5.x MIB reference guide
51