Swblmperfeemntentry; Swblmperfeeport; Swblmperfeerefkey; Swblmperfeecrc - HP StorageWorks 2/64 - Core Switch Reference Manual

swBlmPerfEEMntEntry

OID
Description
Index

swBlmPerfEEPort

OID
Description

swBlmPerfEERefKey

OID
Description

swBlmPerfEECRC

OID
Description

swBlmPerfEEFCWRx

OID
Description

swBlmPerfEEFCWTx

OID
Description

swBlmPerfEESid

OID
Description

swBlmPerfEEDid

OID
Description

swBlmPerfFltMntTable

OID
Description
1.3.6.1.4.1.1588.2.1.1.1.23.2.1
End-to-end monitoring counter for given port.
swBlmPerfEEPort, swBlmPerfEERefKey
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1
This object identifies the port number of the switch.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2
This object identifies the reference number of the counter. This reference is a number
assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one
to the actual reference key.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3
End-to-end CRC error for the frames that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4
Receives end-to-end count of FCWs received by the port that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5
Receives end-to-end count of FCWs transmitted by the port that matched the SID-DID pair.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6
Receives DID information by reference number.
1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7
Receives SID information by reference number. Source Identifier (SID) is a 3-byte field in
the frame header used to indicate the address identifier of the N_Port from which the
frame was sent.
1.3.6.1.4.1.1588.2.1.1.1.23.3
Filter-based monitoring counter.
Fabric OS 5.x MIB reference guide 181