Connectivity Unit Table; Connunittable; Connunitentry; Connunitid - HP StorageWorks 2/64 - Core Switch Reference Manual

Connectivity unit table

connUnitTable

OID
Description

connUnitEntry

OID
Description
Index

connUnitId

OID
Description
Note
1.3.6.1.3.94.1.6
A list of units under a single SNMP agent. The number of entries is given by the value of
uNumber. The value is 1 for stand-alone system.
1.3.6.1.3.94.1.6.1
A connectivity unit entry containing objects for a particular unit.
connUnitId
1.3.6.1.3.94.1.6.1.1
The unique identification for this connectivity unit among those within this proxy domain.
The value must be unique within the proxy domain because it is the index variable for
connUnitTable. The value assigned to a given connectivity unit should be persistent across
agent and unit resets. It should be the same as connUnitGlobalId if connUnitGlobalId is
known and stable.
The HP implementation maps the switch WWN to the top 8 octets of this variable and
sets the remaining lower 8 octets to 0.
To specify a particular instance of any columnar variable in the connUnitEntry (such as
connUnitType), specify the instance identifier as a 16-octet value.
Example:
connUnitType.10.0.0.60.69.4.11.19.0.0.0.0.0.0.0.0
where the object instance identifier consists of 16 octets, each representing the byte value
from high-byte order to low-byte order of this 128-bit integer.
Fabric OS 5.x MIB reference guide 217