Logical Entity Group; Entlogicaltable; Entlogicalentry; Entlogicalindex - HP StorageWorks 2/64 - Core Switch Reference Manual

Logical entity group

This section lists the entityLogical MIBs.

entLogicalTable

OID
Description

entLogicalEntry

OID
Description
Index

entLogicalIndex

OID
Description

entLogicalDescr

OID
Description

entLogicalType

OID
Description
1.3.6.1.2.1.47.1.2.1
This table contains one row per logical entity. For agents that implement more than one
naming scope, at least one entry must exist. Agents that instantiate all MIB objects within
a single naming scope are not required to implement this table.
1.3.6.1.2.1.47.1.2.1.1
Information about a particular logical entity. Entities might be managed by this agent or
by other SNMP agents in the same chassis.
entLogicalIndex
1.3.6.1.2.1.47.1.2.1.1.1
The value of this object uniquely identifies the logical entity. The value should be a small
positive integer; index values for different logical entities are not necessarily contiguous.
1.3.6.1.2.1.47.1.2.1.1.2
A textual description of the logical entity. This object should contain a string that identifies
the manufacturer's name for the logical entity and should be set to a distinct value for
each version of the logical entity.
1.3.6.1.2.1.47.1.2.1.1.3
An indication of the type of logical entity. This is typically the OID name of the node in the
SMI's naming hierarchy that represents the major MIB module, or the majority of the MIB
modules, supported by the logical entity. For example:
• A logical entity of a regular host/router -> mib-2
• A logical entity of a 802.1d bridge -> dot1dBridge
• A logical entity of a 802.3 repeater -> snmpDot3RptrMgmt
If an appropriate node in the SMI's naming hierarchy cannot be identified, the value
mib-2 should be used.
Fabric OS 5.x MIB reference guide 123