Table 11
SW-MIB text conventions (continued)
Type definition
SwFwEvent
SwFwBehavior
SwFwState
SwFwLicense
sw traps
This section contains descriptions and other information that is specific to sw Traps.
See
Table 12
configure the trap, if it is possible to do so.
Table 12
SW MIB traps
Name
swFault
(not supported)
swSensorScn
swFCPortScn
swEventTrap
swFabricWatchTrap
swTrackChangesTrap
See the HP StorageWorks Fabric OS 5.x command reference guide and the snmpMibCapSet command
on how to enable or disable the sending of traps from the various MIBs.
The swSsn variable is optional in trap messages. The swGroupName, swGroupType, and
swGroupMemPos variables are optional in trap messages in 2.6.x. Each of these optional variables can be
set on or off using the snmpMibCapSet command.
142 SW MIB objects
Value
Description
Integer
Possible events available:
1started
2changed
3exceeded
4below
5above
6inBetween
Integer
Behavior type for thresholds:
1triggered
2continuous
Integer
State type for last events:
1swFwInformative
2swFwNormal
3swFwfaulty
Integer
License state:
1swFwLicensed
2swFwNotLicensed
for the descriptions of six traps defined in the SW.MIB, when each trap occurs, and how to
Specific
1
2
3
4
5
6
When
During boot, if diagnostics fail
Obsolete
Port changes state
Switch event
Threshold reached
Login/logout
How to configure
N.A.
N.A.
Always on
See the HP StorageWorks Fabric OS
5.x command reference guide and
the snmpConfig command help
page for more information.
Fabric OS Command:
fwConfigure
Fabric OS Command:
swTrackChanges