Ficon Mib Objects; Ficon Mib Overview; Snmp Traps For Ficon; Ficon Mib System Organization Of Mib Objects - HP StorageWorks 2/64 - Core Switch Reference Manual

7

FICON MIB objects

NOTE: FICON is not supported on HP B-Series Fibre Channel switches. The FICON information in this
document is included for reference only.
This chapter provides descriptions and other information specific to FICON MIB (LINK-INCIDENT-MIB)
object types, including the following information:

• FICON MIB overview

• ficonRNID
• ficonLIRR group, page 203
• ficonRLIR group, page 205
• linkIncidentMIBTraps
FICON MIB overview
The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS 4.1.2 and later.
This MIB addresses link incident and link failure data for FICON hosts and devices connected to an HP
StorageWorks switch.
The descriptions of each of the MIB variables in this chapter come directly from the FICON MIB itself.
The object types in the FICON MIB are organized into the following groupings:
• Request Node Identification Data (RNID)
• Link Incident Record Registration (LIRR)
• Registered Link Incident Report (RLIR)
• Traps

SNMP traps for FICON

SNMP traps for FICON are generated when:
• A FICON device is added to the switch.
• A FICON device is removed from the switch.
• A new listener is added (once the LIRR handshake is complete).
• A listener entry is deleted.
• A link incident occurs.

FICON MIB system organization of MIB objects

Figure 52 through
next
group, page 199
group, page 207
Figure 54 show the organization and structure of the FICON MIB file system.
Fabric OS 5.x MIB reference guide 195