Connunitportunitid; Connunitportindex; Connunitporttype - HP StorageWorks 2/64 - Core Switch Reference Manual

connUnitPortUnitId

OID
Description
Note

connUnitPortIndex

OID
Description
Note

connUnitPortType

OID
Description
228 FibreAlliance MIB objects
1.3.6.1.3.94.1.10.1.1
The connUnitId value of the connectivity unit that contains this port.
Same value as connUnitId.
1.3.6.1.3.94.1.10.1.2
Number of physical ports between 0 and maximum number of system supported ports in
the connectivity unit (internal/embedded, external).
To determine the maximum number of system supported ports, use the SNMP GET
command on swFcPortCapacity.
The HP StorageWorks switches support 0 to maximum number of system supported ports.
The maximum number of supported ports are as follows:
• 8 for the SAN Switch 2/8-EL and SAN Switch 2/8V
• 12 for the Brocade 4Gb SAN Switch for HP p-Class BladeSystem
• 16 for the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/16, and SAN Switch
2/16V
• 32 for the SAN Switch 2/32 and SAN Switch 4/32
• 64 for the Core Switch 2/64
• 128 for the SAN Director 2/128
• 256 for the 4/256 SAN Director
1.3.6.1.3.94.1.10.1.3
The port types are:
• unknown (1)
• other (2)
• not-present (3)
• hub-port (4)
• n-port (5): End port for fabric
• l-port (6): End port for loop
• fl-port (7): Public loop
• f-port (8): Fabric port
• e-port (9): Fabric expansion port
• g-port (10): Generic fabric port
• domain-ctl (11): Domain controller
• hub-controller (12)
• scsi (13): Parallel SCSI port
• escon (14)
• lan (15)
• wan (16)
• ac (17): AC power line. (Not supported in Fabric OS 2.6.1.)
• dc (18): DC power line. (Not supported in Fabric OS 2.6.1)
• ssa (19): Serial storage architecture. (Not supported in Fabric OS 2.6.1.)