Swflashdlfile; Swflashdlpassword; Swbeaconoperstatus; Swbeaconadmstatus - HP StorageWorks 2/64 - Core Switch Reference Manual

swFlashDLFile

OID
Description

swFlashDLPassword

OID
Description

swBeaconOperStatus

OID
Description

swBeaconAdmStatus

OID
Description

swDiagResult

OID
Description

swNumSensors

OID
Description
Note

swSensorTable

OID
Description
1.3.6.1.4.1.1588.2.1.1.1.1.15
The name of the file to be downloaded or uploaded.
1.3.6.1.4.1.1588.2.1.1.1.1.16
The password to be used for FTP transfer of files in the download or upload operation.
1.3.6.1.4.1.1588.2.1.1.1.1.18
The current operational status of the switch beacon. Possible values are:
• On (1): The LEDs on the front panel of the switch run alternately from left to right and
right to left. The color is yellow.
• Off (2): Each LED is in its regular status, indicating color and state.
1.3.6.1.4.1.1588.2.1.1.1.1.19
The desired status of the switch beacon. Possible values are:
• On (1): The LEDs on the front panel of the switch run alternately from left to right and
right to left. Set the color to yellow.
• Off (2): Set each LED to its regular status, as indicated by its color and state.
1.3.6.1.4.1.1588.2.1.1.1.1.20
The result of the POST diagnostics. Possible values are:
• sw-ok (1): The switch is okay.
• sw-faulty (2): The switch has experienced an unknown fault.
• sw-embedded-port-fault (3): The switch has experienced an embedded port fault.
1.3.6.1.4.1.1588.2.1.1.1.1.21
The number of sensors inside the switch.
For example, the SAN Switch 2/16 value is between 1 and 13 (temperature = 6, fan =
3, power supply = 4). The value might vary depending on the switch model. For Fabric
OS 4.x, if no sensor is available, this variable is assigned the value –1.
1.3.6.1.4.1.1588.2.1.1.1.1.22
Table of sensor entries.
Fabric OS 5.x MIB reference guide 151