swFCPortAdmStatus
OID
Description
Note
swFCPortLinkState
OID
Description
Note
swFCPortTxType
OID
Description
swFCPortTxWords
OID
Description
swFCPortRxWords
OID
Description
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5
The desired state of the port. A management station might place the port in a desired
state by setting this object accordingly. Possible values are:
• Online (1): User frames can be passed.
• Offline (2): No user frames can be passed.
• Testing (3): No user frames can be passed.
• Faulty (4): No user frames can be passed.
For Fabric OS 3.x: The 3 (testing) state indicates that no user frames can be passed. As
the result of either explicit management action or per configuration information accessible
by the switch, swFCPortAdmStatus is then changed to either the 1 (online) or the 3
(testing) state or remains in the 2 (offline) state.
For Fabric OS 4.x: The 3 (testing) state is not supported.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
Indicates the link state of the port.
• enabled (1): The port is allowed to participate in the FC-PH protocol with its attached
port (or ports, if it is in an FC-AL loop).
• disabled (2): The port is not allowed to participate in the FC-PH protocol with its
attached ports.
• loopback (3): The port might transmit frames through an internal path to verify the
health of the transmitter and receiver path.
When the port's link state changes, its operational status (swFCPortOpStatus) is affected.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7
Indicates the media transmitter type of the port. Possible values are:
• unknown (1): Cannot determine the port driver.
• lw (2): Long wave laser.
• sw (3): Short wave laser.
• ld (4): Long wave LED.
• cu (5): Copper (electrical).
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11
Counts the number of Fibre Channel words (FCWs) that the port has transmitted.
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12
Counts the number of FCWs that the port has received.
Fabric OS 5.x MIB reference guide 161