Connunittype; Connunitnumports; Connunitstate - HP StorageWorks 2/64 - Core Switch Reference Manual

connUnitType

OID
Description
Note

connUnitNumports

OID
Description
Note

connUnitState

OID
Description
1.3.6.1.3.94.1.6.1.3
The type of this connectivity unit.
Set to 4 (switch).
1.3.6.1.3.94.1.6.1.4
Number of physical ports (between 0 and the maximum number of system supported
ports) in the connectivity unit (internal/embedded, external).
To determine the maximum number of system supported ports, use the SNMP GET
command on swFcPortCapacity.
HP StorageWorks switches support 0 to maximum number of system supported ports.
The maximum number of supported ports are as follows:
• 8 for the SAN Switch 2/8-EL and SAN Switch 2/8V
• 12 for the Brocade 4Gb SAN Switch for HP p-Class BladeSystem
• 16 for the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/16, and SAN Switch
2/16V
• 32 for the SAN Switch 2/32 and SAN Switch 4/32
• 64 for the Core Switch 2/64
• 128 for the SAN Director 2/128
• 256 for the 4/256 SAN Director
1.3.6.1.3.94.1.6.1.5
Overall state of the connectivity unit:
• Unknown (1)
• Online (2): Set the state to online.
• Offline (3): Set the state to offline.
Mapped as follows:
switchState(ONLINE)2 (online)
switchState(not ONLINE)3 (offline, testing, faulty)
Fabric OS 5.x MIB reference guide 219