Trapregentry; Trapregipaddress; Trapregport; Trapregfilter - HP StorageWorks 2/64 - Core Switch Reference Manual

trapRegEntry

OID
Description
Index

trapRegIpAddress

OID
Description

trapRegPort

OID
Description
Note

trapRegFilter

OID
Description
Note

trapRegRowState

OID
Description
1.3.6.1.3.94.2.3.1
IP/port pair for a specific client.
trapRegIpAddress
trapRegPort
1.3.6.1.3.94.2.3.1.1
The IP address of a client registered for traps.
1.3.6.1.3.94.2.3.1.2
The UDP port to send traps to for this host. Normally this would be the standard trap port
(162). This object is an index and must be specified to create a row in this table.
Set to 162.
1.3.6.1.3.94.2.3.1.3
This value defines the trap severity filter for this trap host. The connUnit sends traps to this
host that have a severity level less than or equal to this value. The default value of this
object is Warning. The mapping between errorlog severity level and this variable is:
Error log
none (0)
Critical (1)
Error (2)
Warning (3)
Informational (4)
Debug (5)
This severity applies to all entries. See
The values 1, 3, 7, and 10 are not valid for SET operations.
1.3.6.1.3.94.2.3.1.4
Specifies the state of the row. This entry always returns rowActive and allows for
read-only. Table 26 provides read/write descriptions.
FA-MIB
unknown (1)
critical (4)
error (5)
warning (6)
info (8)
debug (9)
FcEventSeverity in
Fabric OS 5.x MIB reference guide 253
Table 24 on page 215.