Swblmperfalpamnttable; Swblmperfalpamntentry; Swblmperfalpaport; Swblmperfalpaindx - HP StorageWorks 2/64 - Core Switch Reference Manual

ASIC performance monitoring group

This section discusses the swBlmPerfALPAMnt MIBs.

swBlmPerfALPAMntTable

OID
Description
Note

swBlmPerfALPAMntEntry

OID
Description
Index

swBlmPerfAlpaPort

OID
Description

swBlmPerfAlpaIndx

OID
Description
swBlmPerfAlpa
OID
Description

swBlmPerfAlpaCRCCnt

OID
Description
Note

swBlmPerfEEMntTable

OID
Description
180 SW MIB objects
1.3.6.1.4.1.1588.2.1.1.1.23.1
AL_PA monitoring counter table.
For the SAN Switch 4/32, 12 filter monitors per port are supported.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1
AL_PA monitoring counter for given AL_PA.
swEndDevicePort, swEndDeviceAlpa
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1
This object identifies the port index of the switch.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2
This object identifies the AL_PA index. There can be 126 AL_PA values.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3
This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to
239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have
–1 value.
1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4
Get CRC count for given AL_PA and port. This monitoring provides information on the
number of CRC errors that occurred on the frames destined to each possible AL_PA
attached to a specific port.
For the SAN Switch 4/32, this value is always 0.
CRC counters are not supported on this platform.
1.3.6.1.4.1.1588.2.1.1.1.23.2
End-to-end monitoring counter table.