fcFxPortName
OID
Description
Note
fcFxPortFcphVersionHigh
OID
Description
fcFxPortFcphVersionLow
OID
Description
fcFxPortBbCredit
OID
Description
fcFxPortRxBufSize
OID
Description
fcFxPortRatov
OID
Description
fcFxPortEdtov
OID
Description
fcFxPortCosSupported
OID
Description
1.3.6.1.3.42.2.1.1.5.1.3
The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the
address space of the fabric.
The return value is the WWN of the port.
1.3.6.1.3.42.2.1.1.5.1.4
The highest or most recent version of FC-PH that the Fx_Port is configured to support.
1.3.6.1.3.42.2.1.1.5.1.5
The lowest or earliest version of FC-PH that the Fx_Port is configured to support.
1.3.6.1.3.42.2.1.1.5.1.6
The total number of receive buffers available for holding Class 1 connect-request, Class 2,
or Class 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the
direction from the attached Nx_Port (if applicable) to Fx_Port.
1.3.6.1.3.42.2.1.1.5.1.7
The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the
Fx_Port.
1.3.6.1.3.42.2.1.1.5.1.8
The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the
time-out value for determining when to reuse an Nx_Port resource such as a
Recovery_Qualifier. It represents E_D_TOV (see next object) plus twice the maximum time
that a frame might be delayed within the fabric and still be delivered.
1.3.6.1.3.42.2.1.1.5.1.9
The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout Value is used as
the time-out value for detecting an error condition.
1.3.6.1.3.42.2.1.1.5.1.10
A value indicating the set of Classes of Service supported by the Fx_Port.
Fabric OS 5.x MIB reference guide
99