Fcfxportcapholdtimemin; Fcfabric-Element-Mib (Experimental Branch); Fcfabric-Element-Mib Organization - HP StorageWorks 2/64 - Core Switch Reference Manual

fcFxPortCapHoldTimeMin

OID
Description

FCFABRIC-ELEMENT-MIB (experimental branch)

NOTE: The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS 2.6.x and 3.0.x.
This section contains definitions, descriptions, and other information that is specific to
FCFABRIC-ELEMENT-MIB (in the experimental branch), including the following:
• FCFABRIC-ELEMENT-MIB
• Definitions for
• fcFeConfig
• fcFeOp group, page 101
• fcFeError group, page 106
• fcFeAcct group, page 108
• fcFeCap group, page 108
NOTE: HP does not support the settable Write function for any of the Fibre Channel FE MIB objects
except fcFxPortPhysAdminStatus.
The descriptions of each of the MIB variables in this chapter come directly from the
FCFABRIC-ELEMENT-MIB itself. The notes that follow the descriptions typically pertain to HP-specific
information.
The object types in FCFABRIC-ELEMENT-MIB are organized into the following groups:
• Configuration
• Operational
• Error
• Accounting (not supported)
• Capability

FCFABRIC-ELEMENT-MIB organization

Figure 22 through
90 FE MIB objects
1.3.6.1.2.1.75.1.5.1.1.13
The minimum holding time (in microseconds) that the Fx_Port is capable of supporting.
organization, page 90
FCFABRIC-ELEMENT-MIB, page 93
group, page 96
Figure 27 show the organization and structure of FCFABRIC-ELEMENT-MIB.