Select Configure Disk Array; Step G. Configure Arrays And Logical Drives; Hp Netraid Assistant - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 5

Select Configure Disk Array

If HP Navigator asks you to set the date, time, and so on, do so. The HP
Navigator Main Menu then appears.
1. When the HP Navigator Main Menu is displayed, choose NetServer
Utilities.
2. Choose Disk Array Utility from the NetServer Utilities screen. This
launches the HP NetRAID Assistant utility.

Step G. Configure Arrays and Logical Drives

In this step, for each adapter that need to be configured, you will use Worksheets
A and B to:
Configure the arrays of physical drives
Configure the logical drives

HP NetRAID Assistant

Figure 5-4. HP NetRAID Assistant Window
Installation and Configuration
53