Other Troubleshooting - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 11
Following SCSI ID's have the same data <v.z>
Channel-x:a.b.c
Problem: The physical disk roaming feature found the same data on two or more
physical drives on channel (x) with the listed SCSI IDs (a, b, c, and so on). The
adapter cannot determine which drive with duplicate information to use.
Suggested solution: Remove the drive or drives that should not be used.
Unresolved configuration mismatch between disk(s) and NVRAM on the adapter
Problem: The configuration stored in the adapter's NVRAM does not match the
configuration stored on the drives.
Suggested solution:
1. Start HP NetRAID Express Tools, as described in Step M in Chapter 6.
2. Run the View/Add Configuration option of HP NetRAID Express Tools,
as described in the HP NetRAID Series User Guide in Information
Assistant.
3. Use View/Add Configuration to examine both configurations, the one for
the drives and the one in NVRAM.
4. Resolve the configuration mismatch by selecting one of those
configurations to use.

Other Troubleshooting

NOS Does Not Load (Boot)
Problem: Operating system does not load at start up time in a computer with an
adapter.
Suggested solutions:
Verify that the system is trying to boot from the drive/adapter with the
NOS.
Change the BIOS enable/disable as required.
Troubleshooting
123