D Cabling Diagrams; Cables Required - HP D5970A - NetServer - LCII Installation And Configuration Manual

D Cabling Diagrams

Examples of cabling are shown for the systems listed below.
HP NetServer E40 and E45
HP NetServer LC II
HP NetServer LD Pro
HP NetServer LH Pro and LH II
HP NetServer LX Pro
HP NetServer LXe Pro
HP NetServer LXr Pro
HP NetServer LXr Pro8
If you are mounting any of these systems in a rack assembly, refer to the HP
NetServer Rack Assembly and Cabling Reference Guide and to the
documentation for all components.

Cables Required

Cable examples are provided for each HP NetServer model. Other cabling
configurations are possible, but they may require additional cables not listed in
the examples.
CAUTION
Do not use cables other than those specified for use with your
HP NetServer model. While cables from other HP NetServer
models may be identical in length and connector
compatibility, the impedance rating of each cable is unique
and cables are not interchangeable. Installing cables from
other HP NetServer models may show no adverse symptoms
if installed in your HP NetServer, but may result in decreased
overall performance.
147