Configure Disk Array Devices - HP StorageWorks XP48 - Disk Array Configuration Manual

Configure disk array devices

24
Configure the disk array devices in the same way you would configure any
new disk on the host. Creating scripts to configure all devices at once may
save you considerable time.
1. Configuring devices typically requires these steps: Initialize,
partition, and label each device using the disk management utility
provided with the host.
2. Create a file system for each device.
3. Create a mount directory for each device.
4. Enter each device into the mount table.
5. Reboot the host. Verify the devices mounted.
6. Verify file system operation by copying a test file to each device.
HP StorageWorks Disk Array XP Operating System Configuration Guide: DYNIX/ptx