Finishing Up; Novell Netware Server Installation Instructions - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 9
14. Add to the hosts file the names and IP addresses of servers with
adapters to be managed over the network.
In Windows NT systems you will find the hosts file under this
pathname where <winnt path> is the path to the Windows files:
<winnt path>\system32\drivers\etc\hosts
In Windows 95 systems you will find the hosts file under this
pathname where <win95 path> is the path to the Windows files:
<win95 path>\system\hosts
NOTE

Finishing Up

15. Read the Release Notes.
16. Restart Windows NT or Windows 95 if you did not do so in Step 12.

Novell NetWare Server Installation Instructions

For each server operating under Novell NetWare and containing HP NetRAID
Series adapters to be managed over the network, install the HP NetRAID
Network Utilities as described below:
1. For NetWare 4.11 only, the file rpcbstub.nlm is a read-only file. This
file attribute must be changed to read/write before installing the HP
NetRAID Network Utilities on a client connected to NetWare through the
network. Exit to the DOS prompt and change the file attribute to r/w with
the attrib command. The file is located in the \system\ directory of
NetWare on the SYS volume.
2. Start the NetWare server and insert the "NetRAID Utilities for NetWare"
diskette.
3. At the NetWare console prompt, type load a:\raidinst.nlm
4. Choose Install Package.
Managing Servers Over the Network
HP recommends that all servers and clients that manage
HP NetRAID Series adapters over the network have the
same hosts file content. This prevents problems in
resolving server names and addresses.
105