Other Bios Error Messages - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 11
Following SCSI ID's are not Responding
Channel-x:a.b.c
Problem: On the channel listed (x), the physical drives with the SCSI IDs listed
(a, b, c, and so on) are not responding.
Suggested solution: Verify that the physical drives are connected and powered
on.

Other BIOS Error Messages

Warning: Battery voltage Low
Problem: The voltage of the battery backing the cache memory is low.
Suggested solution: Fast charge the battery. This occurs automatically when the
system is on.
Battery temperature out of range
Problem: The temperature of the battery backing the cache memory is too low or
too high.
Suggested solution:
If the battery is too cold, allow it to warm up first. The battery will not fast
charge if it is too cold.
If the battery is too hot, check the system for overheating or fan failure.
The battery will not fast charge if it is too hot.
Battery life Low
Problem: The battery backing the cache memory is approaching its predicted end
of life.
Suggested solution: Replace the battery backup module.
Error: Following SCSI Disk not found and No Empty Slot Available for mapping it
Problem: The physical disk roaming feature failed to find the physical drive with
the listed SCSI ID, and no slot is available in which to map the physical drive.
The controller cannot resolve the physical drives into a current configuration.
Suggested solution: Reconfigure the array because the adapter cannot resolve the
physical drives into the current configuration.
122
Troubleshooting