Define Logical Drives - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 5

Define Logical Drives

NOTE Refer to Worksheet B when defining logical drives.
After you finish defining arrays and hot spares, and click Next, the HP NetRAID
Assistant Wizard Logical Drive Definition window appears. A sample window is
shown in Figure 5-8. The window is ready for you to define Logical Drive 0.
Figure 5-8. HP NetRAID Assistant Wizard Logical Drive Definition Window
The Logical Drive Parameters box shows the number of the logical drive
being defined and has boxes to set its RAID level and size.
The Span Arrays check box turns array spanning on or off.
The Advanced button leads to more parameters, which are preset but can
be changed.
Installation and Configuration
61