10 Understanding HP NetRAID Utilities
After you have installed the adapter and configured your system, there are three
utilities that help you manage HP NetRAID systems. All adapters (HP NetRAID,
NetRAID-1, and NetRAID-3Si) use the same utilities. However, all utilities are
not available to all network operating systems. The three utilities are:
HP NetRAID Assistant
HP NetRAID Config
HP NetRAID Express Tools
HP NetRAID Assistant
All users configure their systems for the first time using HP NetRAID Assistant.
This utility has an object-oriented GUI.
You can start this utility in two ways:
If your NOS is Microsoft Windows NT, click the HP NetRAID icon in the
Windows Program Manager.
If your NOS is Novell NetWare, SCO UNIX, SCO UnixWare, IBM OS/2,
or Banyan VINES, you can start HP NetRAID Assistant from the HP
NetServer Navigator CD-ROM as you did during initial installation. To
use HP NetRAID Assistant from the HP NetServer Navigator CD-ROM,
you must reboot your HP NetServer.
For a list of functions performed by HP NetRAID Assistant, see the menu chart
that follows.
For complete instructions on using HP NetRAID Assistant, see the HP NetRAID
Series User Guide.
113