Print Configuration; Configure Any Other Adapters; Initialize Logical Drives - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 5

Print Configuration

To print a copy of the configuration:
1. Choose Print from the Configuration menu.
2. Keep a copy of configuration Worksheets A and B together with the
printed copy of your configuration file. They help you understand your
configuration, replace a failed adapter, or communicate with HP Customer
Support.

Configure Any Other Adapters

To configure another adapter from the HP NetRAID Assistant window:
1. Click the Adapter pull-down list and select the adapter.
2. Clear its configuration by choosing Clear Configuration from the
Configuration menu. Click OK to the warning prompts.
3. Check the Rebuild Rate by choosing Rebuild Rate from the Adapter
menu and reset the rate if necessary.
4. If global hot spares will be assigned, drag the desired Ready physical
drives into the global hot spare pool.
5. Launch the HP NetRAID Assistant Wizard by choosing Wizard from the
Configuration menu.
6. Configure the adapter as described in Step G.
7. Save the configuration and print it, as described in Step H.

Initialize Logical Drives

If you have not done so already, you must initialize your logical drives.
CAUTION
Initializing a logical drive destroys all data currently on the
disk modules.
To initialize the logical drives you defined for the adapter in the HP
NetRAID Assistant Wizard:
1. If you have more than one adapter, click the Adapter pull-down list and
select the adapter.
2. Select the logical drives to be initialized.
Installation and Configuration
67