Hp Netraid Config - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 10

HP NetRAID Config

HP NetRAID Config performs the same functions as HP NetRAID Assistant, but
it runs under Novell NetWare, SCO UNIX, SCO UnixWare, IBM OS/2, and
Banyan VINES. HP NetRAID Config allows you to reconfigure and manage your
RAID system and monitor its status.
You do not need to reboot your HP NetServer to use HP NetRAID Config.
The command you use to start HP NetRAID Config utility depends on which
NOS you are using.
For Novell Netware, type load megamgr
For SCO UNIX, type megamgr
For SCO UnixWare, type megamgr
For IBM OS/2, type megaconf
For Banyan VINES, type megaconf
For a list of functions performed by HP NetRAID Config, see the menu chart that
follows.
For complete instructions on using HP NetRAID Config, see the HP NetRAID
Series User Guide.
Understanding HP NetRAID Utilities
115