Connect Battery Backup Unit - HP D5970A - NetServer - LCII Installation And Configuration Manual

Chapter 5

Connect Battery Backup Unit

NOTE The HP NetRAID-1 adapter does not have a Battery Backup
Unit.
The HP NetRAID and HP NetRAID-3Si adapters are shipped with the Battery
Backup Unit for the cache memory. The Battery Backup Unit is installed and
charged, but disconnected. Follow the directions below for your specific adapter
to connect the Battery Backup Unit.
CAUTION
When the Battery Backup Unit is connected:
Do not place the HP NetRAID or HP NetRAID-3Si
adapter on a conductive surface.
When installing the adapter, do not allow the adapter or
its Battery Backup Unit to touch any part of the HP
NetServer. Doing so could short the battery, and it may
damage other components. You may place the adapter on
an antistatic mat.
Installation and Configuration
45