Power Supply Specifications; Power Consumption And Heat Dissipation - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

Power supply specifications

Table 1-6 Power supply specifications
Power supply
Operating voltage range
Rated voltage range
Rated line frequency
Operating line frequency range
Rated input current
Heat dissipation
(Configuration and software dependent)
Power supply fan
FEMP Standby Power compliant @115V
(<2W in S5 – Power Off)
ERP Lot 6 (EuP) compliant @230V (<1w in
S5 – Power Off)
Built-in Self Test LED
Surge tolerant full ranging power supply
(withstands power surges up to 2000V)
Power Consumption in sleep mode (as
defined by ENERGY STAR) - Suspend to
RAM (S3) (Instantly Available PC)

Power consumption and heat dissipation

Power consumption and heat dissipation specifications are available for multiple configurations. To
review available specifications, see http://www.hp.com/go/quickspecs.
To reach zero power consumption, unplug the computer from the power outlet or use a power strip with
an on/off switch. For additional information about power-saving features, see the operating system
installation instructions.
This product is in compliance with U.S. Executive Order 13221.
ENWW
Item
240W Wide Ranging,
Active PFC and 89%
efficient
90 – 264 VAC
50–60 Hz
47–63 Hz
4A
Typical 170 BTU/hr =
(42.87 kg-cal/hr)
Maximum 1063 BTU/
hr = (206.27 kg-cal/hr)
One fan, 92mm x
25mm, variable speed
Yes
Yes
No
Yes
<6 watts
Description
100–240 VAC
Computer specifications 9