Cpu; Removing A Cpu - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

CPU

This section describes how to remove and install a CPU.

Removing a CPU

To remove a CPU:
1. Prepare the computer for servicing by following the
CAUTION:
data loss.
2. Remove the access panel (see
3. Remove the CPU heatsink (see
4. Raise the CPU socket lever (1) and open the cover (2) as shown in the following figure (fan
assembly not shown).
Figure 5-58
CAUTION:
extreme care and handle the CPU only by the edges.
5. Pull the CPU straight out of the socket (3), and store the CPU in a static free container in a safe
place where it cannot be damaged
ENWW
Failure to follow the predisassembly procedures can result in equipment damage or
Removing the access panel on page
Removing the CPU heatsink on page
Removing a CPU
Do not touch the CPU socket contacts or the gold pads underneath the CPU. Use
Predisassembly procedures on page
71).
118).
Removing and installing components 121
68.