Download  Print this page

System Fan Assembly; Removing The System Fan Assembly - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

Hp z200 sff workstation maintenance and service guide.
Hide thumbs

Advertisement

System fan assembly

This section describes how to remove and install the system fan assembly.

Removing the system fan assembly

To remove the system fan assembly:
1.
Prepare the computer for servicing by following the
CAUTION:
data loss.
2.
Remove the access panel (see
3.
Remove the front bezel (see
4.
Remove the cables from the support arm on the airflow guide
5.
Remove the airflow guide by pulling it straight up and out of the chassis, as shown in the following
figure. (The processor heatsink is not shown.)
Figure 5-41
ENWW
Failure to follow the predisassembly procedures can result in equipment damage or
Removing the access panel on page
Removing the front bezel on page
Removing the airflow guide
Predisassembly procedures on page
71).
72).
Removing and installing components 103
68.

Advertisement

Table of Contents

   Related Manuals for HP Z200 - Small Form Factor Workstation

This manual is also suitable for:

Z200 sff

Comments to this Manuals

Symbols: 0
Latest comments: