Configuring Raid Devices; Maximum Hard Drive Configurations - HP Z200 - Small Form Factor Workstation Maintenance And Service Manual

7

Configuring RAID devices

This chapter describes how to configure SATA RAID devices on all Z series computers and includes
these topics:
Maximum hard drive configurations on page 162
Configuring SATA RAID devices on page 163
For additional information about configuring RAIDs, see http://www.hp.com/support/RAID_FAQs. For
information about preparing the computer for RAID configuration, see
workstation_manuals.

Maximum hard drive configurations

This section lists the maximum number of hard drives supported on HP computers for RAID
configurations.
NOTE: This section applies to internal computer configurations that do not use add-in cards and
JBODs.
TIP: Use the table values to determine computer-specific maximum number of hard drives as
discussed the sections below.
Table 7-1
Workstation
Z800
Z600
Z400
Z200
Z200 SFF
Small form factor hard drive
*
162 Chapter 7 Configuring RAID devices
Topics
Maximum hard drives
SATA hard drive
5
3
4
3
2
SATA SFF *
hard drive
6
4
4
0
2
http://www.hp.com/support/
ENWW