Removing The Pci Retainer; Installing The Pci Retainer - HP Xw8400 - Workstation - 4 GB RAM User Manual

Removing the PCI retainer

1. Disconnect power from the system (
access panel
facing up.
2. For short or tall cards, lift the PCI retainer arm (1) with one hand, press in on the sides (2) of the
retainer, and rotate it (3) out of the chassis.
Figure 4-18

Installing the PCI retainer

1. Disconnect power from the system (
access panel
facing up.
72 Chapter 4 Removal and replacement procedures
(Access panel on page
Removing the short or tall card PCI retainer
(Access panel on page
Pre-disassembly procedures on page
60). Place the workstation on its side with the system board
Pre-disassembly procedures on page
60). Place the workstation on its side with the system board
55), and remove the
55), and remove the
ENWW