HP Xw8400 - Workstation - 4 GB RAM User Manual page 90

2. Disconnect the audio (1), data (2), and power (3) cables from the drive. The connector colors might
be different than illustrated.
NOTE
Figure 4-28
3. Lift the green drivelock release lever, and gently slide the drive out of the chassis.
Figure 4-29
80 Chapter 4 Removal and replacement procedures
The audio cable is only required for Linux-based systems.
Disconnecting the IDE (left) or SATA (right) cable from the optical drive
Removing the optical drive from the chassis
ENWW