Download  Print this page

HP Xw8400 - Workstation - 4 GB RAM User Manual Page 118

Hp xw8400 service and technical reference guide.
Hide thumbs

Advertisement

Table 5-2
Diagnostic LED codes (continued)
Power LED and Sound
Activity
Blinks red 7 times, once per
second, then 2 second pause,
7 beeps.
Blinks red 8 times, once per
second, then 2 second pause,
8 beeps
Blinks red 9 times, once per
second, then 2 second pause, 9
beeps
* Refer to the Service and Technical Reference Guide for your workstation for BIST information.
108
Chapter 5 System diagnostics and troubleshooting
Chassis Indicator LEDs
System board failure (ROM detected failure before video).
1.
Clear CMOS.
2.
Replace system board.
Invalid ROM based on bad checksum.
1.
Clear CMOS.
2.
Upgrade the ROM using a ROMPaq diskette, CD, diskette, or USB removable device
(e.g., HP Drive Key). See the ROM Flash section of the Service and Technical Reference
Guide at http://www.hp.com/support/workstation_manuals.
3.
Replace system board.
System powers on but is unable to boot.
1.
Replace the system board.
2.
Replace the processor.
Diagnosis and Service Action
ENWW

Advertisement

Table of Contents

   Related Manuals for HP Xw8400 - Workstation - 4 GB RAM

Comments to this Manuals

Symbols: 0
Latest comments: