System/Memory Fan Assembly - HP Xw8400 - Workstation - 4 GB RAM User Manual
Hp xw8400 service and technical reference guide
Hide thumbs
Also See for Xw8400 - Workstation - 4 GB RAM:
- Service and technical reference manual (210 pages) ,
- Technical reference manual (200 pages) ,
- Specification (82 pages)
Table of Contents
Advertisement
Figure 4-11
To install the power supply, reverse the previous steps.
System/memory fan assembly
The system fan and memory fan are connected and treated as a unit. To remove the system/memory
fan assembly:
1.
Disconnect power from the system (
access panel
facing up.
2.
Press the green tab (2) at the base of the memory fan, and lift it up.
3.
Disconnect the system fan and memory fan power plugs from their system board connectors (1).
66
Chapter 4 Removal and replacement procedures
Removing the power supply
(Access panel on page
Pre-disassembly procedures on page
60). Place the workstation on its side with the system board
55), and remove the
ENWW
Advertisement
Table of Contents
Troubleshooting
