Replacing The System Board - HP Xw8400 - Workstation - 4 GB RAM User Manual
Hp xw8400 service and technical reference guide
Hide thumbs
Also See for Xw8400 - Workstation - 4 GB RAM:
- Service and technical reference manual (210 pages) ,
- Technical reference manual (200 pages) ,
- Specification (82 pages)
Table of Contents
Advertisement
Replacing the System Board:
1.
Insert the system board straight down, and be sure that all system board standoffs engage with
the keyholes in the chassis.
NOTE
2.
Push back on the board while maintaining downward pressure on the board, so all standoffs remain
engaged.
3.
Install the heatsink
ENWW
Be sure the system board connectors engage correctly with the rear I/O panel.
(Replacing the CPU heatsink on page
90).
Removing and replacing components
95
Advertisement
Table of Contents
Troubleshooting
