Removing An Expansion Slot Retainer; Removing An Expansion Board Retainer - HP ProLiant ML310 Maintenance And Service Manual

Removing an Expansion Slot Retainer

To remove an expansion slot retainer:
1. Complete the preparation procedures. Refer to "Preparation Procedures" in this chapter.
2. Remove the access panel. Refer to "Access Panel" in this chapter.
3. Release the expansion board retainer by loosening the screw (1) and pivoting the retainer
back towards the front of the chassis (2).
Figure 2-23: Removing an expansion board retainer
To replace an expansion board retainer, reverse steps 2 and 3.
HP ProLiant ML310 Server Maintenance and Service Guide
Removal and Replacement Procedures
2-29