HP Xw8400 - Workstation - 4 GB RAM User Manual page 102

2. Raise the processor socket handle (1) fully (the full swing angle of the lever is approximately 105
degrees). Lift the processor socket cover (2).
Figure 4-47
3. Lift the processor straight out of the socket.
Figure 4-48
CAUTION
or installing it.
NOTE
92 Chapter 4 Removal and replacement procedures
Raising the processor socket handle
Lifting the processor from the socket
To avoid bending the socket pins, keep the processor perfectly flat when removing
Store the processor in a safe place where it will not be damaged.
ENWW