Pci Slots; Pci Retainer; Removing The Pci Retainer - HP Xw8400 - Workstation - 4 GB RAM Technical Reference Manual

3. Gently push out on the socket levers.
4. Lower the DIMM straight down, and ensure the socket levers secure the module into place.
5. Lower the memory fan until it snaps into place.
NOTE:

PCI slots

Figure 4-19
Table 4-4 PCI slots
1 PCI (32-bit, 33 MHz)
2 PCI Express x16 graphics
3 PCI x8 (x4 performance)
4 PCI Express x16 (x4 performance)
5 PCI-X 133
6 PCI-X 100
7 PCI-X 100

PCI retainer

For added protection, some cards have PCI retainers installed to prevent movement during shipping.

Removing the PCI retainer

1. Disconnect power from the system (
access panel
facing up.
68 Chapter 4 Removal and replacement procedures
Ensure that all cables are clear of the fan housing when lowering the memory fan.
Identifying PCI slots
Type
(Access panel on page
Ref
J21
J41
J20
J31
J22
J23
J23
Pre-disassembly procedures on page
57). Place the workstation on its side with the system board
50), and remove the
ENWW