Operating Procedure - Brother KE-430B Instruction Manual

Electronic lockstitch bar tacker; electronic lockstitch belt loop bar tacker; electronic lockstitch eyelet buttonhole end bar tacker; electronic lockstitch decorative pattern tacker
Hide thumbs Also See for KE-430B:
Table of Contents

Advertisement

5-2. Operating procedure

Preparation
Turn on the power switch.
(The POWER indicator q will illuminate and the pro-
gram number will flash in the display window !4 . )
5-2-1. Setting the program number
Determine the appropriate program from the program list which is given on pp. 3 - 6.
Press the SELECT switch y
1
until the PROGRAM NO. in-
dicator illuminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER
5-2-2. Setting the X-scale and Y-scale
Press the SELECT switch y
1
until the X-scale or Y-scale
indicator illuminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER
5-2-3. Setting the sewing speed
Press the SELECT switch y
1
until the SPEED indicator il-
luminates.
PROGRAM NO.
P
X - SCALE
Y - SCALE
SPEED
S E L E C T
COUNTER
2
Press the DISPLAY SET
switches !2 until the desired
program number is flashing
in the display window.
y
0083Q
Press the DISPLAY SET
2
switches !2 until the de-
sired scale setting is flash-
ing in the display window.
(The setting is displayed as a per-
centage.)
y
0086Q
Press the DISPLAY SET
2
switches !2 until the de-
sired speed setting is flash-
ing in the display window.
y
0088Q
KE-430B, 431B, 432B, 433B
Factory
default
KE-430B
Program No.
0 *1
1 – 35
X-scale (%)
100
Y-scale (%)
100
Speed (rpm)
2,000
*1 For checking the origin points for X and Y feed
*2 Custom-made program
!2
0084Q
!2
0087Q
NOTE:
!2
0089Q
5. OPERATION
Variable range
KE-431B
KE-432B
1 – 6
1 – 3
20 – 200
20 – 200
1,000 – 2,700
3
Depress the foot switch to
the second step.
* The display will stop flashing
and illuminates steadily, and
the feed mechanism will move
to the sewing start position.
1st step
2nd step
This completes the setting of the pro-
gram number.
Depress the foot switch to
3
the second step.
* The display will stop flashing
and illuminates steadily, and
the feed mechanism will move
to the sewing start position.
1st step
2nd step
This completes the setting of the X-scale
or Y-scale.
Be sure to check the sewing pattern
(refer to page 22) after setting has
been completed to make sure that
the needle hole does not go out of
the area circumscribed by the work
clamp.
KE-433B
100 – *2
1,000 – 2,500
0085Q
0085Q
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ke-432bKe-431bKe-433b

Table of Contents