Chapter 5 Operating Procedure; Part Names And Functions Of The Operation Panel - Brother BAS-364E Instruction Manual

Chapter 5 OPERATING PROCEDURE

Chapter 5 OPERATING PROCEDURE

1. Part names and functions of the operation panel

q POWER indicator ........................ When the power is turned on, the indicator lights to show that the power is on.
w PROGRAM No. display ............... Displays the program number 00 - 99.
e Program select switch ................. Used to select the program number when reading a program from or writing a
r Program Read/Write switch ........ Used to read a program from floppy disk, or to write a newly programmed
t Display screen ............................ Used to display data such as menus, errors and memory switch settings.
y Menu switch ................................ Used to select the desired menu (scale, speed, bobbin thread counter, split
u X-SCALE indicator ...................... Illuminates when X-scale mode has been selected using the menu switch y.
i Y-SCALE indicator ...................... Illuminates when Y-scale mode has been selected using the menu switch y.
o SPEED indicator ......................... Illuminates when speed mode has been selected using the menu switch y.
19
y
program to disk.
stitch pattern to floppy disk.
Up to ten patterns (00 - 99) can be stored on each disk.
No.). One of the indicators u - !1 illuminates to indicate the menu selected,
and the setting for that menu them appears on the display screen t.
The illuminated indicator changes in the following order each time the switch
is pressed.
X-SCALE indicator u
B.T. COUNTER indicator !0
BAS-364E, 366E, 370E, 375E
Y-SCALE indicator i
SPLIT NO. indicator !1 1
SPEED indicator o