Nudging Inside; Breaking Out Paste Inside - Brother Ensemble PDP-300CJ Owner's Manual

Nudging Inside

Breaking Out Paste Inside

Drawing 230
6. Choose Paste Inside. Drawing pastes the inside object in the outside
object:
Once you have pasted an object inside another, you can fine tune the
position of the inside object by moving it one pixel at a time.
" To nudge inside:
1. Select the object that contains the object or objects you want to nudge
inside.
2. Choose Paste Inside from the Edit menu. The submenu at the left
appears.
3. Choose Nudge Inside. A submenu appears.
4. Select Nudge Left, Right, Up, or Down. Drawing nudges the inside
object one pixel in the direction you select.
Once you have pasted one object inside another, you can break the object
into its component objects using the Break Out Paste Inside command.
That way, you can manipulate the individual objects.
" To break out paste inside:
1. Select the object you want to break out.
2. Choose Paste Inside from the Edit menu. A submenu appears.
3. Choose Break Out Paste Inside. Drawing splits the component objects
into separate objects.