Printing With Standard Settings; Changing Items In Print Dialog Box - Brother Ensemble PDP-300CJ Owner's Manual

Printing with Standard Settings

If you have not set your Page
Size and Page Setup to
accurately reflect the actual size
and layout of your document, it
will not print correctly . See page
28 to define the page.
T o print from the T ypewriter
application, see Chapter 10.

Changing Items in Print Dialog Box

For color models: T o save time
and ink, use color ink–jet only
when you require a color print.
Use the black ink–jet cartridge
when you want to print a
preliminary draft of a color
document to check for placement
of graphics or to proofread it. The
black ink–jet cartridge will print
blacks much faster than the color
ink–jet cartridge can print either
black or color .
CAUTION:
When Printing
T ransparencies:
S Use transparency film for
ink–jet printers only . W e
recommend Lexmark
transparency film for ink–jet
printers, IBM ExecJet 4076
or 4076c, or Hewlett Packard
#HP 51636F.
S Avoid high temperature and
high humidity printing .
S Allow sheets to dry
individually to avoid ink
transfer and smudging;
single sheet, manual feeding
is recommended.
" To print a document with standard settings:
informingyou that your document is printing. The document prints with
the standard settings.
" To change Printer Options:
S
Ink: Monochrome, Color.
S
Medium.
Transparencies
The Print dialog box appears.
A message appears
The Print dialog box appears.
Getting Started 47