Paper will not insert properly if
there is too much in the tray . Do
not exceed the 30 sheet limit.
A void using glossy or slick paper
in the paper tray because it can
cause paper jams.
T o manually insert single sheets
of paper while the cut sheet
feeder is attached, see next page.
6. Align the paper with the left tab and slide the right tab to the left until it
almost touches the edge of the paper.
7. Pull down on the paper release lever (on the right side of the paper
feeder) to release the paper tray pressure plate so that the paper is held
tightly against the rollers.
Getting Started 13