Changing Type Style, Size - Brother Ensemble PDP-300CJ Owner's Manual

I
f you create a text object but do
not enter any text, you may leave
an empty text object in your
drawing. When a text object does
not contain text and is not
selected, the object becomes
invisible. If you leave many empty
text objects in your drawing, they
can obscure portions of other
objects. However , you can easily
locate and delete these empty
text objects.
Changing T ype Style, Size
Y ou can combine styles to create
Plain Type Underlined , Bold
Underlined , Italic Underlined ,
Bold Italic , and Bold Italic
Underlined , and you can apply
Strike Thru, Superscript or
Subscript to any of those styles.
The default style is Plain T ype.
size of capital letters.
. If your characters are too large for the words to fit in the
object you defined, Drawing extends the object depth, but not its width.
To resize a text object, see the procedure below.
" To move, resize, or delete a text object:
" To delete empty text objects:
a single vertical I-beam.
object.
OR
DELETE
Style
S
S
Bold
S
Italic
S
S
S
S
S
S
Size
The blinking vertical line cursor shows the
Handles appear around the text
The object disappears.
BACKSPACE
Drawing 235
The pointer changes to