Manual Paper Insertion (With Cut Sheet Feeder); Removing The Cut Sheet Feeder - Brother Ensemble PDP-300CJ Owner's Manual

Manual Paper Insertion (with Cut Sheet Feeder)

CAUTION:
Do not use the platen
knob to insert paper. For
proper paper insertion,
you must use the PAPER
INSERT key. The platen
knob should only be used
to remove jammed paper.

Removing the Cut Sheet Feeder

Getting Started 14
" To insert one sheet with the cut sheet feeder:
1. Remove all paper from the back paper slot of the cut sheet feeder.
2. Slide a sheet of paper into the tray in front of the front paper support.
Slide the paper against the paper guide on the left.
3. Press PAPER INSERT key. Do not use the platen knob to insert or
adjust paper.
" To remove the cut sheet feeder:
1. Turn the Ensemble system off.
2. Push down on the cut sheet feeder release button.
3. Lift up on the back of the cut sheet feeder and pull firmly while slightly
tilting toward the keyboard.
4. Slide the feeder out of the Ensemble unit.
5. Reinstall the paper support and turn the Ensemble system on.