Kyocera KM-2540 Operation Manual page 38

Ready for fax transmission.
Original Image
Normal Ultra fine
Half tone
Fine
Super fine
x transmission.
mit
lete Pause Space Subadd.
8½×11" Normal
TX
Original Original
Size Image
tion
Register Print Report
Ready for fax transmission.
Density setting
Dark
Regular
Light
2-6
6
Memory usage: .0%
JUN-06-2007 16:00
Dest.
check
Next des
Re-dial
On-hook
Regular
Memory TX
Density
Mode
Auto RX
7
2 Select the desired resolution from among the 5 available.
Note The Fine and Super fine resolutions reproduce
clearer images in comparison to transmission with the
Normal resolution, but transmission time is longer.
The Half tone [Half-tone] resolution reproduces grays
clearly, but transmission time is longer than with the
Normal or Fine resolutions.
To transmit with the Ultra fine resolution, 32 MB of
optional memory must be installed. If the additional
memory is NOT installed, the Ultra fine resolution will not
selectable.
To transmit with the Super fine or Ultra fine resolutions,
the receiving fax must have the corresponding resolution
capabilities in order to benefit from their features. If the
receiving fax does not have the corresponding capability,
transmission will be accomplished with the Fine
resolution.
Selecting the density
It is possible to select a density from among the 3 available settings.
Density Description
Dark For transmitting light documents at a darker
contrast.
Regular For transmitting document with a normal contrast.
Light For transmitting dark documents at a lighter
contrast.
Note The default setting is for Regular density.
1 If you want to change the density, press the [Density Mode] key.
2 Select the desired density from among the 3 available.
Indicating the document size
When you set any documents that you want to transmit on the
platen, you will need to indicate the size of those documents.
This procedure is not necessary when transmitting documents from
the Document Processor.
Fax Operation (Basic)