Accessing The Application Screen When Restricted Access Is Turned On; Accessing The Print Report Screen When Restricted Access Is Turned On - Kyocera KM-2540 Operation Manual

ID-code is set.
Enter ID-code.
Basic Application Register
Ready for fax transmission.
Enter Destination.
Dest
CDE
FREE GDE
Address TX
Abbrev.
book setting
Basic Application
Option screen
Select item.
Sub.conf. Reserved
TX Polling
box input TX status
Sub.conf. TX result
RX Polling
box output on LCD
Print encr RX result
data box on LCD
Basic Application
Fax Operation (Advanced)
Accessing the Application Screen When Restricted
Access is Turned ON
When Restricted Access is turned ON, perform the following procedure
in order to access the Application screen (available when you press the
[Application] key) and thereby use the corresponding functions of this fax
machine.
1
2
Each
Clear
Enter
Print Report
3
Print Report
4
Print Report
Accessing the Print Report Screen When Restricted
Access is Turned ON
When Restricted Access is turned ON, perform the following procedure
in order to access the Print Report screen (available when you press the
[Print Reports] key) and thereby print out the corresponding reports.
Use the numeric keys to enter a viable ID-code (between 1 and 8
digits).
Press the [Enter] key.
Press the [Application] key.
The Application screen will appear. Perform the desired procedure.
Note The reports that are available for print out will depend on
whether you enter an ID-code or the registered administrator
number.
If you enter an ID-code...Only the Activity Report, Confirmation
Report and Restricted Access Report are available.
If you enter the administrator number...All reports are available
3-65